MRV Communications LX-4000 Series Technické informace stáhnout pdf (Strana 96)

100

101

Setting Up Remote Console Management

Explicitly Setting LX Asynchronous Port Characteristics 3-5

3. In Asynchronous Command Mode, enter the appropriate

command to set the speed, parity, data bits, stop bits, flow

control, or autohangup setting for the asynchronous port.

Table 3.1 lists the commands that you can use to set the

port characteristics that pertain to remote console

management of directly connected Network Elements. For

the full syntax of each command listed in Table 3.1, see the

LX Series Command Reference.

L MRV Communications recommends that you enable

Autohangup on an LX asynchronous port that will be

used to do remote console management. This

ensures that the port will drop the connection, when

the network element resets DTR at subscriber logout.

Table 3.1 Commands for Setting

Asynchronous Port Characteristics

Port Characteristics Allowable Values Command Examples

autohangup enabled or disabled

autohangup enable

no autohangup

data bits 5, 6, 7, or 8

bits 6

flow control xon or cts

flowcontrol cts

flowcontrol xon

parity even, odd, none, mark,

or space

parity even

parity odd

parity none

parity mark

parity space

speed auto, 134, 200, 300,

600, 1200, 2400,

4800, 9600, 19200,

38400, 57600, 115200,

or 230400

speed 115200

stop bits 1 or 2

stopbits 1

stopbits 2

See

“Command

Mode

Descriptions”

on page 1-5

for

information

about

accessing

Asynchronous

Command

Mode.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 691 692

Komentáře k této Příručce

Žádné komentáře

MRV Communications LX-4000 Series Technické informace Strana 96

Komentáře k této Příručce

Související produkty a manuály pro Servery MRV Communications LX-4000 Series